
![]() |
Variotherm Modular Wall Heating combines heating and wall in one. The complete, ready to use modules are ideally suited for dry wall construction. They can be used according to your individual needs as panel dimensions may be adjusted flexibly. Fast and simple installation leaving no mess is guaranteed. |
Operating with low temperature the Variotherm Modular Wall Heating system is very economical. Close contact of the Variomodular Pipe and the gypsum fibre panel guarantee fast heating and greatest possible efficiency.
Variotherm Moduar Wall Heating is the perfect solution for wood frame construction, prefabricated homes and attic expansions combining heating and finished wall in one.
Variotherm wall heating can be found in blocks of flats, family homes, nurseries, schools, hotels, offices and production facilities - in fact everywhere, where people wish to enjoy the organically healthy radiant heating which our wall heating radiates. How you shape the wall is up to you. From the invisibly integrated wall heating to decorative ledges and cornices, lots of architectural solutions are possible.
Variotherm Wall Heating increases the human comfort level considerably. They produce longwaved horizontal infrared radiant heat which provides ultimate comfort, just like sun warmth which is also radiant heat. Unlike heat from conventional heating systems radiant heat does not travel upwards and dust circulation is avoided. Variotherm Wall Heating is thus ideal for your comfort and provides a healthy room climate.
As a large-surface low temperature system Variotherm wall heating uses the ability of walls to store heat, which provides great energy savings and can be ideally combined with all alternative energy systems such as heat pumps, solar installations etc.
With Variotherm wall heating you can also create a super ambient climate in summer. How? Simply by letting cold water circulate through your wall heating system. And immediately your wall heating turns into organically healthy wall cooling.
Without all the troublesome dust and air which are raised by conventional air-conditioning systems. With Variotherm wall cooling you can enjoy a feeling of well-being in summer, which you will otherwise only experience in the natural, cool shade of a mighty tree.
The organically harmonious and physically beneficial Variotherm wall cooling
works as follows: the walls are cooled by the circulation of cold water. The
human body automatically emits warmth to the cool walls. As a result heat stored
within the body is reduced in a biologically compatible way, and you experience
a pleasantly cool sensation.
Conventional air-conditioning units use a lot of energy. They have to circulate
large amounts of air in order to cool a room. This generates an aggressive
kind of cold which can cause a temperature shock when people enter the room.
The dust stirred up by the air-conditioned circulating air and the mites
it contains are extremely detrimental to health.
Instead of cooling the air, Variotherm wall cooling in contrast cools the human body by drawing off its warmth. This is much healthier and also creates a much more pleasant sensation. In flats under the roof Variotherm wall cooling always ensures an ideal ambient climate, even during hot weather.
Variotherm wall cooling operates at minimal energy input. It cools not the air but the heat stored in the human body. This is more effective, healthier and considerably cheaper. A long-term comparison has shown that our wall cooling has much lower operating costs than conventional air-conditioning systems.
4 different panel sizes cover almost any building needs. Offering a complete solution (heating and wall in one), installation is fast and simple leaving no big mess.
Specially shaped channels are sunk into building biology institute tested FERMACELL® gypsum fibre panels. Pre-inserted specifically designed 5-layer composite Variomodular pipe is pressed into these channels. It is fully integrated into the gypsum fibre panels. Its 11.6 m outer diameter and 1.5 mm pipe wall thickness minimize pipe friction loss, and is 100% impermeable to oxygen and water vapour diffusion. Its close contact with the gypsum fibre panels heats them more quickly and effciently.

|
| Date published | Title | File size | Document type | ||
| 15/11/2006 |
|
276 KB | Product sheet | ||
| 15/11/2006 |
|
304 KB | Product sheet |
To order this product, or to request pricing / quotations, please do one of the following:
- call us at 020-7232-1181
- fax us at 020-7023-3789
- email
us at sales@constructionresources.com
- use our online quotation request form.
Our hours of business are Monday to Friday, 10.00 to 18.00.